The KEG Sewer Flush nozzle is a general-purpose cleaning nozzle for sanitary lines up to 24". Dual 15° and 25° jet angles flush debris and clean the pipe wall in one pass, and the threaded inserts are replaceable.
Best Uses for the KEG Sewer Flush Nozzle
Sanitary lines up to 24", general sewer cleaning.
KEG Sewer Flush Nozzle Features
15° and 25° dual jet angles
Replaceable threaded inserts
Sizes from 1/4" for small lines to 1-1/4" for mains
KEG Sewer Flush Nozzle Sizes and Part Numbers
Hose size
Inserts
Dimensions
Pipe size from
1/4" (A)
4 Rear (M5)
1" x 7/8"
2"
3/8" (B)
5 Rear (M5)
1" x 1"
3"
1/2" (C)
5 Rear (M6)
2 1/10" x 1 1/2"
3"
3/4" (D)
8 Rear (M8)
3 7/8" x 2 1/2"
4"
1" (E)
10 Rear (M8)
6" x 3 1/2"
6"
1 1/4" (E)
12 Rear (M14)
7" x 3 7/8"
8"
Match the nozzle's hose size to your jetter hose, and check the minimum pipe size before you run it.
How to Choose the Right KEG Sewer Nozzle
Size options run from 1/4" (A) to 1 1/4" (E) (6 choices)
Connection: 1/4" or 3/8" or 1/2" or 3/4" or 1" or 1-1/4"
Fewer, larger jets put more impact on the pipe wall (MSW)
What size connection does the KEG Sewer Flush Nozzle use?
1/4" or 3/8" or 1/2" or 3/4" or 1" or 1-1/4". Match it to the hose or lance it threads onto.
How do I pick a KEG nozzle size?
Start with your hose size (the letter or inch size on the table), then check the minimum pipe size listed for that model.
Can I replace the inserts?
Many KEG nozzles use replaceable threaded inserts, especially in the larger hose sizes. Small sizes often use drilled inserts. The Sizes table shows which.
Not sure which one fits your truck? Call 402-237-1914 (Mon to Fri, 7AM to 4PM) and talk to someone who has run the equipment.
