Hydra-Flex Reaper Rotating Sewer Nozzle

The Hydra-Flex Reaper is a rotating sewer jetting nozzle built for pulling, thrusting and cleaning power. The front jet fires a 0° stream that rotates into a cone to cut blockages, while fixed 20° rear jets pull the nozzle down the line and flush debris back.

Reaper Rotating Sewer Nozzle Features

• Rotating front jet: 24° cone on 3/8", 30° cone on 1/2" and 1"
• Fixed rear jets at 20° for thrust and flushing
• Stainless steel housing with tungsten carbide wear surfaces
• Rated to outlast ceramic nozzles; repair kits available

Hydra-Flex Reaper Rotating Sewer Nozzle Specifications

• Pressure range: 1,500 to 4,000 PSI
• Max temperature: 180°F
• Flow: the size number is the flow at 4,000 PSI (for example #12.0 = 12 GPM)

Common Uses for the Reaper Rotating Sewer Nozzle

• Jetters running 1,500 to 4,000 PSI
• Cutting grease, ice and roots with a rotating front jet

How to Choose the Right Rotating Sewer Nozzle

• 12 nozzle size choices, each with its own part number
• Rated to 5,000 PSI; your pump's maximum should not exceed it
• Connection: 1/4" or 3/8" or 1/2" or 1"
• Order front rotor and rear jet repair kits by nozzle size

Compare every option in our Sewer Jetting Nozzles collection.

Reaper Rotating Sewer Nozzle Rebuild Kits and Parts

• Reaper Front Rotor Repair Kits
• Reaper Rear Jet Repair Kits
• Dome Inlet Screens, 10 Pack

Hydra-Flex Reaper Rotating Sewer Nozzle FAQ

What pressure is the Reaper Rotating Sewer Nozzle rated for?

Up to 5,000 PSI. Keep every part in the line rated at or above your pump's maximum pressure.

What does the Reaper size number mean?

Hydra-Flex sizes the Reaper so the number equals the GPM at 4,000 PSI.

Can I rebuild a Reaper?

Yes. Front rotor and rear jet repair kits are sold by nozzle size, and dome inlet screens protect the rotor.

Not sure which one fits your truck? Call 402-237-1914 (Mon to Fri, 7AM to 4PM) and talk to someone who has run the equipment.

Related Sewer Jetting Nozzles

• Shop all Sewer Jetting Nozzles