The Southland Vac-Trap for 8" Vactor flat flange suction tubes is the standard Vac-Trap for Vactor-style tubes: a flat flange end that clamps to your tube the same way your other flanged sections do.
Clamp the Vac-Trap to the end of your 8" suction tube and lower it into the invert. Debris, grease and rock are picked up while most of the water stays in the sewer, so you are not decanting or hauling extra water, and the open bottom gives your jetter nozzle room to work while you vacuum. No back bar brace is needed.
Vac-Trap Sizes and Part Numbers
Pipe size
Part number
6"
BT-6
8"
BT-8
10"
BT-10
12"
BT-12
15"
BT-15
18"
BT-18
Southland Vac-Trap for 8" Vactor Suction Tube Flat Flange Specifications
Connection: 8" flat flange (Vactor style)
Pipe sizes: 6" to 18"
Brand: Southland Tool
Grit covers: not included (see the BT-S version)
Common Uses for the Vac-Trap
Jetting and vacuuming at the same time
Vacuuming debris while leaving water in the sewer
How to Choose the Right Vac-Trap
Size options run from 6" to 18" (6 choices)
Built for Vactor style equipment
Match your 8" tube end: Vactor flat flange, Camel female Bandlock or Vac-All male Bandlock
